Prince 750mm

£24.00 per section exc. VAT

A tall, slender radiator, the Prince 750mm fits neatly in all interiors. Its ornate foliage motif adds a touch of grandeur to a classic radiator design. This model is available in one height only. The Price 750mm proudly heats all public areas of Chadderton Town Hall near Manchester.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	246	336	339	1156	20	£72.00
4	318	408	452	1541	27	£96.00
5	390	480	565	1927	33	£120.00
6	462	552	678	2312	39	£144.00
7	534	624	791	2697	46	£168.00
8	606	696	904	3083	52	£192.00
9	678	768	1017	3468	59	£216.00
10	750	840	1130	3853	65	£240.00
11	822	912	1243	4239	71	£264.00
12	894	984	1356	4624	78	£288.00
13	966	1056	1469	5009	84	£312.00
14	1038	1128	1582	5395	91	£336.00
15	1110	1200	1695	5780	97	£360.00
16	1182	1272	1808	6165	103	£384.00
17	1254	1344	1921	6551	110	£408.00
18	1326	1416	2034	6936	116	£432.00
19	1398	1488	2147	7321	123	£456.00
20	1470	1560	2260	7707	129	£480.00

Current Prince 750mm cast iron radiators in Radiators2Go

11 sections (822mm) long in Gold M4001. £330.00, 1 available.

Buy a Radiator2Go today for earliest estimated delivery on Wednesday 8^th February.

Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.

View all models and sizes in Cast Iron Radiators2Go.

Buy bespoke Prince 750mm cast iron radiators for earliest estimated delivery on Wednesday 22^nd February.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 20 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Prince 750mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	113Watts / 385BTUs
Dimensions
Section height (including legs):	750mm
Section height (not including legs):	680mm
Section length (measured along the wall):	72mm
Radiator depth (perpendicular to the wall):	150mm
Distance from inlet/outlet pipe centre to floor:	113mm
Minimum distance from inlet/outlet pipe centre to skirting board:	75mm
Weight
Empty weight per section (middle section):	6.4kg
Empty weight per section (leg section):	6.9kg
Internal Volume
Internal volume per section:	1.8 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.