Princess 810mm

  • £40.80 per section
    £34.00 exc. VAT
  • Product id: CIR-PRINCESS-810
  • Linear details on curved columns. High heat output and elegant design typically found in schools and hospitals. Also available at 760mm and 560mm tall.
  • Tech spec
  • In stock
  • Radiator builder
  • Ready in 7 to 10 days

What size radiator do I need?

Current Princess 810mm cast iron radiators in Radiators2Go


Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.

Tech specs for Princess 810mm

Linear details on smooth columnar casting. High heat output and elegant design typically found in schools and hospitals. Also available at 760mm and 560mm tall.

Hand assembled section by section to give the length and heat output required. Available in any finish and delivered in one piece up to 1.13m or up to 2m long with partial home assembly. 

Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Heat Output
Heat output per section (ΔT=60°): 180 Watts /
614 BTUs
Dimensions
Leg section height: 810mm
Middle section height: 730mm
Section length: 78.7mm
Radiator depth: 188mm
Bottom inlet to floor: 105mm
Top inlet to floor: 760mm
Pipe centres to skirting board: 94mm
Weight
Empty weight leg section: 13.0kg
Empty weight middle section: 12.0kg
Internal volume
Internal volume section: 2.8 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron
Maximum lengths for delivery in one piece
Ground floor destination 14 sections
Upstairs destination 11 sections

Measurements

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes. We can offer any valve configuration, but as standard we'll always fit them BBOE.