Mercury 3 Column 760mm

Castrads CI/M3C/760 1949583
2025-01-01 From: £33.00
Currently out of stock

Mercury represents the new global standard in cast iron radiators, with curves that fall gracefully into the shadows and lines as crisp and straight as a die. Mercury 3 Column 760mm is a hip-height radiator perfect in hallways and mid-sized rooms. 

Print tech specs

  • mm deep, 760mm tall
  •  Watts / 266 BTUs per section

*price per radiator section

What size radiator do I need?

Details

Mercury. A modern classic. 

Mercury 3 Column Cast Iron Radiators

The most flawlessly engineered cast iron radiator of our time. Designed and engineered in Manchester, UK.

Mercury cast iron radiator from Castrads

Representing four years of design, one hundred prototypes and the pinnacle of casting technology, Mercury is the most finely tuned cast iron radiator available today. With inspiration from automotive surface design, Mercury has curves that are perfectly blended, falling away with the shadow. It's lines are as straight as a die thanks to ultra modern mould machining technology.     

High heat in a compact footprint

Mercury 3 Column has been designed with modern UK homes in mind. These models pack a punch without taking up too much floor space - just 101mm deep from the wall, about the same as a modern steel panel radiator. 

Low frequency heat cycles

Mercury has a high internal volume. That means that once the water in the radiator is hot it'll release its energy gently and gradually into the room. Your boiler cycles less regularly than with a lower water content radiator and you'll feel fewer extremes of temperature inside your home. 

The environmentally sound choice

Properly maintained cast iron radiators will last not decades but centuries. Compare that with a steel panel radiator, which needs to be replaced once every ten to twenty years, and it's easy to see why a cast iron radiator is a sound investment for the future. 

Mercury is poured in a foundry that's powered electrically - without burning coal in its furnaces - and assembled and finished in Manchester in a factory powered by 25% solar, with responsible waste management. We use recyclable packaging where possible.

Tech specs

Heat Output
Heat output per section: 77.5 Watts / 264 BTUs
Dimensions
Leg section height: 760mm
Middle section height: 698mm
Section length: 58.3mm
Radiator depth: 101mm
Bottom inlet to floor: 100mm
Top inlet to floor: 723mm
Pipe centres to skirting board: 53mm
Weight
Empty weight leg section: 5.01kg
Empty weight middle section: 4.85kg
Internal volume
Internal volume section: 0.76 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron

Measurements

Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here