Grace 2 Column 740mm

Castrads CI/G2C/740 1133148
2025-01-01 From: £30.00
In stock

Cast in Europe. A slimline radiator perfect for hallways or smal WC's.

Shown here in Grey Bronze with accessories in Satin Nickel.

Print tech specs

  • mm deep, 740mm tall
  •  Watts / 239 BTUs per section
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?


740mm tall and just 89mm deep. Small in profile, big on original features. Create a bold statement in Victorian hallways. We recommend this radiator in glossy Black Nickel or in muted greys and paired with Windsor valves for maximum effect.

Radiators are custom built section by section to give the correct heat output. Build up the correct number of sections to get the length, and heat output, you need. 

Delivered in one piece up to 1.1m long or with partial home assembly up to 2m. Integrated feet. Wall stays are necessary to secure this radiator to the wall once installed. Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Tech specs

Heat Output
Heat output per section: 70 Watts / 239 BTUs
Leg section height: 740mm
Middle section height: 680mm
Section length: 60.3mm
Radiator depth: 89mm
Bottom inlet to floor: 97mm
Top inlet to floor: 700mm
Pipe centres to skirting board: 47mm
Empty weight leg section: 4.1kg
Empty weight middle section: 3.6kg
Internal volume
Internal volume section: 0.56 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron


Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here