4 Column 800mm

Castrads CI/C4C/813 26
2025-01-01 From: £26.40
In stock

Victorian style radiator used extensively in period properties. Delicate columns with linear detail.

Shown here in Mid Grey Sparkle with accessories in Satin Nickel.

Print tech specs

  • 146mm deep, 800mm tall
  •  Watts / 372 BTUs per section
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?

Details

Tallest model within the 4 Column family. Column radiator with excellent heat output, 800mm tall, 144.5mm deep and sold fully assembled and ready to plumb up to 1.1 metres long, or up to two metres long with partial home assembly. Available in four heights and any finish. We like 4 Column radiators in cool, neutral greys or match the finish of your wall to lose the radiator. 

We recommend Windsor thermostatic valves for an elegant finish with energy efficient operation.  

Radiators are custom built section by section to give the correct heat output. All our cast iron radiators include integrated feet unless specified otherwise. Wall stays are required to secure this radiator to the wall once installed. Also available at 460mm, 660mm and 760mm tall. 

Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Tech specs

Heat Output
Heat output per section: 109 Watts / 372 BTUs
Dimensions
Leg section height: 800mm
Middle section height: 720mm
Section length: 56mm
Radiator depth: 146mm
Bottom inlet to floor: 120mm
Top inlet to floor: 760mm
Pipe centres to skirting board: 75mm
Weight
Empty weight leg section: 5.05kg
Empty weight middle section: 4.75kg
Internal volume
Internal volume section: 1 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron

Measurements

Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here