4 Column 660mm

Castrads CI/C4C/660 24
2025-01-01 From: £23.76
In stock

Victorian style radiator used extensively in period properties. Delicate columns with linear detail.

Shown here in Old Penny with accessories in Satin Nickel.

Print tech specs

  • 141mm deep, 655mm tall
  • 76 Watts / 259 BTUs per section
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?

Details

Mid level column radiator, 655mm tall, 141mm deep and sold fully assembled and ready for plumbing up to 1.1 metres long, or up to two metres long with partial home assembly. Available in four heights and any finish. We like 4 Column radiators in cool, neutral greys or match the finish of your wall to lose the radiator. 

We recommend Windsor thermostatic valves for an elegant finish with energy efficient operation.  

Radiators are custom built section by section to give the correct heat output. All our cast iron radiators include integrated feet unless specified otherwise. Wall stays are required to secure this radiator to the wall once installed. Also available at 460mm, 760mm and 813mm tall. 

Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Tech specs

Heat Output
Heat output per section: 76 Watts / 259 BTUs
Dimensions
Leg section height: 650mm
Middle section height: 580mm
Section length: 60.2mm
Radiator depth: 141mm
Bottom inlet to floor: 112mm
Top inlet to floor: 610mm
Pipe centres to skirting board: 73mm
Weight
Empty weight leg section: 4.7kg
Empty weight middle section: 4.5kg
Internal volume
Internal volume section: 0.8 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron

Measurements

Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here