4 Column 460mm

Castrads CI/C4C/460 23
2025-01-01 From: £22.44
In stock

Low-level Victorian style radiator used extensively in period properties. Delicate columns with linear detail.

Shown here in Pewter with accessories in Polished Brass.

Print tech specs

  • 143mm deep, 455mm tall
  •  Watts / 181 BTUs per section
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?


Low level column radiator, 455mm tall, 143mm deep and available up to 1.1 metres long delivered in one piece, or up to two metres with partial home assembly. Available in any finish. We like 4 Column radiators in cool, neutral greys or match the finish of your wall to lose the radiator. Perfectly suited for bay windows.  

We recommend Windsor thermostatic valves for an elegant finish with energy efficient operation.  

Radiators are custom built section by section to give the correct heat output. All our cast iron radiators include integrated feet unless specified otherwise. Wall stays are required to secure this radiator to the wall once installed. 

Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Tech specs

Heat Output
Heat output per section: 53 Watts / 181 BTUs
Leg section height: 455mm
Middle section height: 380mm
Section length: 59.8mm
Radiator depth: 143mm
Bottom inlet to floor: 113mm
Top inlet to floor: 414mm
Pipe centres to skirting board: 74mm
Empty weight leg section: 3.2kg
Empty weight middle section: 2.9kg
Internal volume
Internal volume section: 0.6 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron


Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here