3 Column 645mm

From: £17.40 was £25.08
saving 31%
In stock

Victorian style column radiator suited to smaller period properties and modern conversions.

Shown here in Ashen White with accessories in Satin Nickel.

Print tech specs

  • 120mm deep, 645mm tall
  •  Watts / 315 BTUs per section
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?

Details

Mid level column radiator, 645mm tall, 120mm deep and available up to 1.1 metres long delivered in one piece, or up to two metres with partial home assembly. Finish in cool, neutral greys or match the finish of your wall to lose the radiator. 

We recommend Windsor thermostatic valves for energy efficient operation and a classic aesthetic.    

Radiators are custom built section by section to give the correct heat output. All our cast iron radiators include integrated feet unless specified otherwise. Wall stays are required to secure this radiator to the wall once installed. 

Built to last in Machester and, naturally, covered by our no quibble ten year guarantee.   

Tech specs

Heat Output
Heat output per section: 73 Watts / 249 BTUs
Dimensions
Leg section height: 647mm
Middle section height: mm
Section length: 61mm
Radiator depth: 120mm
Bottom inlet to floor: 105mm
Top inlet to floor: 605mm
Pipe centres to skirting board: 62mm
Weight
Empty weight leg section: 4.6kg
Empty weight middle section: 4.2kg
Internal volume
Internal volume section: 1.1 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron

Measurements

Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here