3 Column 450mm

£ 15.60 was £22.44
saving 30%
In stock

Low level Victorian style cast iron radiator perfect in bay windows. Compact footprint and ideal under windows.

Shown here in Chalk with accessories in Satin Nickel.

Print tech specs

  • 117mm deep, 448mm tall
  • Watts / 164 BTUs per section
  • Perfect under windows and in bays
  • Completed in 7 - 10 working days
  • Custom-built and hand-finished in Manchester

*price per radiator section

What size radiator do I need?


Knee level column radiator, 120mm deep and available up to 1.1 metres long delivered in one piece, or up to two metres with partial home assembly. Finish in cool greys for neutrality or match the finish of your wall to lose the radiator. 

We recommend Windsor thermostatic valves for energy efficient operation and a classic aesthetic.    

Radiators are custom built section by section to give the correct heat output. Build up the correct number of sections to get the length, and heat output, you need. If fitting in a bay, consider one longer radiator under the central window and and a smaller radiator each side.  

Tested for compliance with the CE Kitemark in the UK by BSRIA. This model and its production process are certified to BS EN442 by BSI. 

Built to last in Machester and, naturally, covered by our no quibble ten year Ironshield Guarantee (with optional extension to 25 years).   


Ironshield Guarantee

Tech specs

Heat Output
Heat output per section: 48 Watts / 164 BTUs
Leg section height: 451mm
Middle section height: mm
Section length: 61.6mm
Radiator depth: 121mm
Bottom inlet to floor: 102mm
Top inlet to floor: 405mm
Pipe centres to skirting board: 63mm
Empty weight leg section: 3.4kg
Empty weight middle section: 3.0kg
Internal volume
Internal volume section: 0.9 l
Construction materials
Radiator sections: Cast iron
End caps and reducing bushes: Cast iron


Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they've been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and position the pipework with absolute confidence.

Installing cast iron radiators

We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).

Our radiators are sold in over 60 finishes.

See them all here