Royale 760mm

£30.00 per section exc. VAT

With luxuriant foliage spiralling down from the top and a delightful spray of flower heads climbing up from the feet, the Royale 760mm makes a charming addition to any room. Please note this model is available in one height only.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	246	336	396	1350	30	£90.00
4	318	408	528	1800	39	£120.00
5	390	480	660	2251	48	£150.00
6	462	552	792	2701	58	£180.00
7	534	624	924	3151	67	£210.00
8	606	696	1056	3601	76	£240.00
9	678	768	1188	4051	86	£270.00
10	750	840	1320	4501	95	£300.00
11	822	912	1452	4951	104	£330.00
12	894	984	1584	5401	113	£360.00
13	966	1056	1716	5852	123	£390.00
14	1038	1128	1848	6302	132	£420.00
15	1110	1200	1980	6752	141	£450.00
16	1182	1272	2112	7202	151	£480.00
17	1254	1344	2244	7652	160	£510.00
18	1326	1416	2376	8102	169	£540.00
19	1398	1488	2508	8552	179	£570.00
20	1470	1560	2640	9002	188	£600.00

Current Royale 760mm cast iron radiators in Radiators2Go

10 sections (750mm) long in Pewter. £300.00, 2 available.

Buy a Radiator2Go today for earliest estimated delivery on Wednesday 29^th February.

Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.

View all models and sizes in Cast Iron Radiators2Go.

Buy bespoke Royale 760mm cast iron radiators for earliest estimated delivery on Friday 2^nd March.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 17 sections.
Upstairs destination - 14 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Royale 760mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	132Watts / 450BTUs
Dimensions
Section height (including legs):	760mm
Section height (not including legs):	685mm
Section length (measured along the wall):	72mm
Radiator depth (perpendicular to the wall):	175mm
Distance from inlet/outlet pipe centre to floor:	118mm
Minimum distance from inlet/outlet pipe centre to skirting board:	88mm
Weight
Empty weight per section (middle section):	9.3kg
Empty weight per section (leg section):	10.2kg
Internal Volume
Internal volume per section:	2.2 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.