Rococo 950mm

£38.00 per section exc. VAT
Currently out of stock

The Rococo 950mm is a tall, ornate radiator. Its flourishing decoration and scrolled top coupled with its slender design make the Rococo 950mm a great, space saving alternative to the King range, perfect for narrow hallways and small rooms.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	255	345	360	1228	36	£114.00
4	330	420	480	1637	48	£152.00
5	405	495	600	2046	59	£190.00
6	480	570	720	2455	71	£228.00
7	555	645	840	2864	83	£266.00
8	630	720	960	3274	94	£304.00
9	705	795	1080	3683	106	£342.00
10	780	870	1200	4092	118	£380.00
11	855	945	1320	4501	130	£418.00
12	930	1020	1440	4910	141	£456.00
13	1005	1095	1560	5320	153	£494.00
14	1080	1170	1680	5729	165	£532.00
15	1155	1245	1800	6138	176	£570.00
16	1230	1320	1920	6547	188	£608.00
17	1305	1395	2040	6956	200	£646.00
18	1380	1470	2160	7366	211	£684.00
19	1455	1545	2280	7775	223	£722.00
20	1530	1620	2400	8184	235	£760.00

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £19 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 16 sections.
Upstairs destination - 12 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Rococo 950mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	120Watts / 409BTUs
Dimensions
Section height (including legs):	950mm
Section height (not including legs):	900mm
Section length (measured along the wall):	75mm
Radiator depth (perpendicular to the wall):	120mm
Distance from inlet/outlet pipe centre to floor:	108mm
Minimum distance from inlet/outlet pipe centre to skirting board:	60mm
Weight
Empty weight per section (middle section):	11.7kg
Empty weight per section (leg section):	12.1kg
Internal Volume
Internal volume per section:	1.3 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.