Queen 760mm

£37.00 per section exc. VAT

The Queen 760mm is a tall, highly decorative radiator. Like the King range this model is a replica of an original French cast and features similar Rococo style flourishes and scrolls in its design. The Queen 760mm is a slightly slimmer alternative to the King 768mm. For low window settings see the Queen 510mm.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	261	351	456	1555	35	£111.00
4	338	428	608	2073	47	£148.00
5	415	505	760	2592	58	£185.00
6	492	582	912	3110	70	£222.00
7	569	659	1064	3628	82	£259.00
8	646	736	1216	4147	93	£296.00
9	723	813	1368	4665	105	£333.00
10	800	890	1520	5183	116	£370.00
11	877	967	1672	5702	128	£407.00
12	954	1044	1824	6220	140	£444.00
13	1031	1121	1976	6738	151	£481.00
14	1108	1198	2128	7256	163	£518.00
15	1185	1275	2280	7775	174	£555.00
16	1262	1352	2432	8293	186	£592.00
17	1339	1429	2584	8811	198	£629.00
18	1416	1506	2736	9330	209	£666.00
19	1493	1583	2888	9848	221	£703.00
20	1570	1660	3040	10366	232	£740.00

Buy bespoke Queen 760mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 15 sections.
Upstairs destination - 11 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Queen 760mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	152Watts / 518BTUs
Dimensions
Section height (including legs):	760mm
Section height (not including legs):	701mm
Section length (measured along the wall):	77mm
Radiator depth (perpendicular to the wall):	210mm
Distance from inlet/outlet pipe centre to floor:	105mm
Minimum distance from inlet/outlet pipe centre to skirting board:	105mm
Weight
Empty weight per section (middle section):	11.6kg
Empty weight per section (leg section):	11.8kg
Internal Volume
Internal volume per section:	2.4 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.