Queen 510mm

£34.00 per section exc. VAT

A low, ornate radiator, the Queen 510mm looks particularly attractive below bay windows and in conservatories. Like the King range this model is a replica of an original French cast and features similar Rococo style flourishes and scrolls in its design. The Queen 510mm is a slightly slimmer alternative to the King 470mm or 570mm models.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	270	360	291	992	22	£102.00
4	350	440	388	1323	30	£136.00
5	430	520	485	1654	37	£170.00
6	510	600	582	1985	44	£204.00
7	590	680	679	2315	51	£238.00
8	670	760	776	2646	58	£272.00
9	750	840	873	2977	66	£306.00
10	830	920	970	3308	73	£340.00
11	910	1000	1067	3638	80	£374.00
12	990	1080	1164	3969	87	£408.00
13	1070	1160	1261	4300	94	£442.00
14	1150	1240	1358	4631	102	£476.00
15	1230	1320	1455	4962	109	£510.00
16	1310	1400	1552	5292	116	£544.00
17	1390	1480	1649	5623	123	£578.00
18	1470	1560	1746	5954	130	£612.00
19	1550	1640	1843	6285	138	£646.00
20	1630	1720	1940	6615	145	£680.00

Buy bespoke Queen 510mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 17 sections.
Upstairs destination - 15 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Queen 510mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	97Watts / 331BTUs
Dimensions
Section height (including legs):	510mm
Section height (not including legs):	445mm
Section length (measured along the wall):	80mm
Radiator depth (perpendicular to the wall):	210mm
Distance from inlet/outlet pipe centre to floor:	105mm
Minimum distance from inlet/outlet pipe centre to skirting board:	105mm
Weight
Empty weight per section (middle section):	7.2kg
Empty weight per section (leg section):	7.6kg
Internal Volume
Internal volume per section:	1.7 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.