Princess 760mm

£34.00 per section exc. VAT

The Princess 760mm is a tall school radiator. Its rounded contours and smooth casting make it an elegant choice for any room. This smart model is also available in a shorter version.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	270	360	453	1545	35	£102.00
4	350	440	604	2060	46	£136.00
5	430	520	755	2575	57	£170.00
6	510	600	906	3089	68	£204.00
7	590	680	1057	3604	79	£238.00
8	670	760	1208	4119	90	£272.00
9	750	840	1359	4634	101	£306.00
10	830	920	1510	5149	112	£340.00
11	910	1000	1661	5664	123	£374.00
12	990	1080	1812	6179	134	£408.00
13	1070	1160	1963	6694	145	£442.00
14	1150	1240	2114	7209	156	£476.00
15	1230	1320	2265	7724	167	£510.00
16	1310	1400	2416	8239	178	£544.00
17	1390	1480	2567	8753	189	£578.00
18	1470	1560	2718	9268	200	£612.00
19	1550	1640	2869	9783	211	£646.00
20	1630	1720	3020	10298	222	£680.00

Buy bespoke Princess 760mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 16 sections.
Upstairs destination - 13 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Princess 760mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	151Watts / 515BTUs
Dimensions
Section height (including legs):	760mm
Section height (not including legs):	735mm
Section length (measured along the wall):	80mm
Radiator depth (perpendicular to the wall):	190mm
Distance from inlet/outlet pipe centre to floor:	118mm
Minimum distance from inlet/outlet pipe centre to skirting board:	95mm
Weight
Empty weight per section (middle section):	11kg
Empty weight per section (leg section):	12kg
Internal Volume
Internal volume per section:	2.6 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.