Princess 560mm

£28.00 per section exc. VAT

The Princess 560mm is a smart school radiator. Its rounded contours and smooth casting make it an elegant choice for any room. This model is also available in a taller version.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	261	351	330	1125	26	£84.00
4	338	428	440	1500	34	£112.00
5	415	505	550	1876	42	£140.00
6	492	582	660	2251	50	£168.00
7	569	659	770	2626	58	£196.00
8	646	736	880	3001	66	£224.00
9	723	813	990	3376	74	£252.00
10	800	890	1100	3751	82	£280.00
11	877	967	1210	4126	90	£308.00
12	954	1044	1320	4501	98	£336.00
13	1031	1121	1430	4876	106	£364.00
14	1108	1198	1540	5251	114	£392.00
15	1185	1275	1650	5627	122	£420.00
16	1262	1352	1760	6002	130	£448.00
17	1339	1429	1870	6377	138	£476.00
18	1416	1506	1980	6752	146	£504.00
19	1493	1583	2090	7127	154	£532.00
20	1570	1660	2200	7502	162	£560.00

Buy bespoke Princess 560mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 18 sections.
Upstairs destination - 13 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Princess 560mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	110Watts / 375BTUs
Dimensions
Section height (including legs):	560mm
Section height (not including legs):	535mm
Section length (measured along the wall):	77mm
Radiator depth (perpendicular to the wall):	190mm
Distance from inlet/outlet pipe centre to floor:	118mm
Minimum distance from inlet/outlet pipe centre to skirting board:	95mm
Weight
Empty weight per section (middle section):	8kg
Empty weight per section (leg section):	9kg
Internal Volume
Internal volume per section:	2.0 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.