King 970mm

£47.00 per section exc. VAT

The King 970mm is a tall, highly decorative radiator. With ornate, Rococo style flourishes and a scrolled top, this model makes a handsome feature. The King 970mm has the highest heat output on the market. Available exclusively from Castrads. Also available in four other heights to suit all room sizes.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	261	351	735	2506	51	£141.00
4	338	428	980	3342	67	£188.00
5	415	505	1225	4177	84	£235.00
6	492	582	1470	5013	100	£282.00
7	569	659	1715	5848	117	£329.00
8	646	736	1960	6684	133	£376.00
9	723	813	2205	7519	150	£423.00
10	800	890	2450	8355	166	£470.00
11	877	967	2695	9190	183	£517.00
12	954	1044	2940	10025	199	£564.00
13	1031	1121	3185	10861	216	£611.00
14	1108	1198	3430	11696	232	£658.00
15	1185	1275	3675	12532	249	£705.00
16	1262	1352	3920	13367	265	£752.00
17	1339	1429	4165	14203	282	£799.00
18	1416	1506	4410	15038	298	£846.00
19	1493	1583	4655	15874	315	£893.00
20	1570	1660	4900	16709	331	£940.00

Buy bespoke King 970mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 10 sections.
Upstairs destination - 8 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for King 970mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	245Watts / 835BTUs
Dimensions
Section height (including legs):	970mm
Section height (not including legs):	912mm
Section length (measured along the wall):	77mm
Radiator depth (perpendicular to the wall):	270mm
Distance from inlet/outlet pipe centre to floor:	113mm
Minimum distance from inlet/outlet pipe centre to skirting board:	135mm
Weight
Empty weight per section (middle section):	16.5kg
Empty weight per section (leg section):	17kg
Internal Volume
Internal volume per section:	2.8 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.