King 768mm
£37.00 per section exc. VAT
The King 768mm is a tall, highly decorative cast iron radiator replicated from an original French cast. With ornate, flourishes and a scrolled top, this model makes a handsome feature in keeping with any classic interior. The King range is available in four other heights to suit all room sizes. For narrow rooms and hallways, the Rococo 950mm is a great alternative.
| No Sections |
Radiator length, mm |
Pipe centres, mm |
Output, Watts |
Output, BTUs |
Weight, kg |
Price exc. VAT |
| 3 | 267 | 357 | 534 | 1821 | 39 |
£111.00
|
| 4 | 346 | 436 | 712 | 2428 | 51 |
£148.00
|
| 5 | 425 | 515 | 890 | 3035 | 64 |
£185.00
|
| 6 | 504 | 594 | 1068 | 3642 | 76 |
£222.00
|
| 7 | 583 | 673 | 1246 | 4249 | 89 |
£259.00
|
| 8 | 662 | 752 | 1424 | 4856 | 101 |
£296.00
|
| 9 | 741 | 831 | 1602 | 5463 | 114 |
£333.00
|
| 10 | 820 | 910 | 1780 | 6070 | 126 |
£370.00
|
| 11 | 899 | 989 | 1958 | 6677 | 139 |
£407.00
|
| 12 | 978 | 1068 | 2136 | 7284 | 151 |
£444.00
|
| 13 | 1057 | 1147 | 2314 | 7891 | 164 |
£481.00
|
| 14 | 1136 | 1226 | 2492 | 8498 | 176 |
£518.00
|
| 15 | 1215 | 1305 | 2670 | 9105 | 189 |
£555.00
|
| 16 | 1294 | 1384 | 2848 | 9712 | 201 |
£592.00
|
| 17 | 1373 | 1463 | 3026 | 10319 | 214 |
£629.00
|
| 18 | 1452 | 1542 | 3204 | 10926 | 226 |
£666.00
|
| 19 | 1531 | 1621 | 3382 | 11533 | 239 |
£703.00
|
| 20 | 1610 | 1700 | 3560 | 12140 | 251 |
£740.00
|
Current King 768mm cast iron radiators in Radiators2Go
| 10 sections (820mm) long in F&B Old White. £430.00, 2 available.
|
|
| 11 sections (899mm) long in Antique silver powder coat. £572.00, 1 available.
|
|
| 14 sections (1136mm) long in Pewter. £518.00, 1 available.
|
|
Buy a Radiator2Go today for earliest estimated delivery on Wednesday 8th February.
Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.
View all models and sizes in Cast Iron Radiators2Go.
Change ΔT values:
Current output figures based on ΔT =
60°C
What's Delta T?
Delta T is the difference in temperature between the water circulating through your central heating system and the ambient temperature (usually about 20°C).
If you're unsure, leave this value at the default 60°C.
Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.
Maximum lengths for delivery in one piece:
Ground floor destination - 14 sections.
Upstairs destination - 10 sections.
See why here
Delays sometimes occur. Please don't book your plumber until you have the radiators on site.
All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.
Tech specs for King 768mm cast iron radiators
Heat output |
|
Heat output per section (ΔT=60°C): |
178Watts / 607BTUs |
Dimensions |
| Section height (including legs): |
768mm |
| Section height (not including legs): |
708mm |
| Section length (measured along the wall): |
79mm |
| Radiator depth (perpendicular to the wall): |
270mm |
| Distance from inlet/outlet pipe centre to floor: |
110mm |
| Minimum distance from inlet/outlet pipe centre to skirting board: |
135mm |
Weight |
| Empty weight per section (middle section): |
12.5kg |
| Empty weight per section (leg section): |
13kg |
Internal Volume |
| Internal volume per section: |
2.0 L |
Construction materials |
| Radiator sections: |
Cast iron |
| Gaskets: |
Steel reinforced silicon |
| End caps & reducing bushes: |
Cast iron |
Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.
Installing cast iron radiators
Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.
View all radiator valves.
Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator.
All other configurations are possible, just let us know when placing your order.
RSS