King 670mm

£35.50 per section exc. VAT

The King 670mm is a medium height, decorative radiator replicated from a popular, original French cast. With ornate, Rococo style flourishes and a scrolled top, this cast iron radiator makes a handsome feature in keeping with any classic interior. This style comes in four other heights to suit all room sizes and settings.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	267	357	465	1586	36	£106.50
4	346	436	620	2114	48	£142.00
5	425	515	775	2643	59	£177.50
6	504	594	930	3171	71	£213.00
7	583	673	1085	3700	82	£248.50
8	662	752	1240	4228	94	£284.00
9	741	831	1395	4757	106	£319.50
10	820	910	1550	5286	117	£355.00
11	899	989	1705	5814	129	£390.50
12	978	1068	1860	6343	140	£426.00
13	1057	1147	2015	6871	152	£461.50
14	1136	1226	2170	7400	164	£497.00
15	1215	1305	2325	7928	175	£532.50
16	1294	1384	2480	8457	187	£568.00
17	1373	1463	2635	8985	198	£603.50
18	1452	1542	2790	9514	210	£639.00
19	1531	1621	2945	10042	222	£674.50
20	1610	1700	3100	10571	233	£710.00

Buy bespoke King 670mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 14 sections.
Upstairs destination - 12 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for King 670mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	155Watts / 529BTUs
Dimensions
Section height (including legs):	670mm
Section height (not including legs):	618mm
Section length (measured along the wall):	79mm
Radiator depth (perpendicular to the wall):	270mm
Distance from inlet/outlet pipe centre to floor:	135mm
Minimum distance from inlet/outlet pipe centre to skirting board:	135mm
Weight
Empty weight per section (middle section):	11.6kg
Empty weight per section (leg section):	12.2kg
Internal Volume
Internal volume per section:	1.9 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.