King 470mm

£29.00 per section exc. VAT

The King 470mm is a decorative radiator replicated from a popular, original French cast. With ornate, Rococo style flourishes and a scrolled top, this model makes a handsome feature in keeping with any classic interior. While the King 470mm is a low cast iron radiator ideal for bay windows and conservatories, this style comes in four other heights to suit all settings.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	267	357	315	1074	23	£87.00
4	346	436	420	1432	30	£116.00
5	425	515	525	1790	38	£145.00
6	504	594	630	2148	45	£174.00
7	583	673	735	2506	53	£203.00
8	662	752	840	2864	60	£232.00
9	741	831	945	3222	67	£261.00
10	820	910	1050	3581	75	£290.00
11	899	989	1155	3939	82	£319.00
12	978	1068	1260	4297	90	£348.00
13	1057	1147	1365	4655	97	£377.00
14	1136	1226	1470	5013	104	£406.00
15	1215	1305	1575	5371	112	£435.00
16	1294	1384	1680	5729	119	£464.00
17	1373	1463	1785	6087	127	£493.00
18	1452	1542	1890	6445	134	£522.00
19	1531	1621	1995	6803	141	£551.00
20	1610	1700	2100	7161	149	£580.00

Buy bespoke King 470mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 18 sections.
Upstairs destination - 15 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for King 470mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	105Watts / 358BTUs
Dimensions
Section height (including legs):	470mm
Section height (not including legs):	418mm
Section length (measured along the wall):	79mm
Radiator depth (perpendicular to the wall):	250mm
Distance from inlet/outlet pipe centre to floor:	110mm
Minimum distance from inlet/outlet pipe centre to skirting board:	125mm
Weight
Empty weight per section (middle section):	7.4kg
Empty weight per section (leg section):	7.8kg
Internal Volume
Internal volume per section:	1.5 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.