Duchess 590mm

£31.00 per section exc. VAT

The Duchess 590mm is a traditional school radiator with a simple, linear design. Neat scrolls on the feet complement the classic lines and add a subtly stylish flair. With its thick casting, the Duchess 590mm retains its heat for longer, giving a particularly well-balanced performance.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	240	330	330	1125	26	£93.00
4	310	400	440	1500	34	£124.00
5	380	470	550	1876	42	£155.00
6	450	540	660	2251	51	£186.00
7	520	610	770	2626	59	£217.00
8	590	680	880	3001	67	£248.00
9	660	750	990	3376	76	£279.00
10	730	820	1100	3751	84	£310.00
11	800	890	1210	4126	92	£341.00
12	870	960	1320	4501	100	£372.00
13	940	1030	1430	4876	109	£403.00
14	1010	1100	1540	5251	117	£434.00
15	1080	1170	1650	5627	125	£465.00
16	1150	1240	1760	6002	134	£496.00
17	1220	1310	1870	6377	142	£527.00
18	1290	1380	1980	6752	150	£558.00
19	1360	1450	2090	7127	159	£589.00
20	1430	1520	2200	7502	167	£620.00

Buy bespoke Duchess 590mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £19 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 16 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Duchess 590mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	110Watts / 375BTUs
Dimensions
Section height (including legs):	590mm
Section height (not including legs):	540mm
Section length (measured along the wall):	70mm
Radiator depth (perpendicular to the wall):	170mm
Distance from inlet/outlet pipe centre to floor:	110mm
Minimum distance from inlet/outlet pipe centre to skirting board:	85mm
Weight
Empty weight per section (middle section):	8.3kg
Empty weight per section (leg section):	8.7kg
Internal Volume
Internal volume per section:	1.6 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.