Count 640mm

£26.00 per section exc. VAT

The Count 640mm is an attractive radiator that features a delicate floral cascade and scrolls at the feet. Similar in shape to the Princess models, the Count 640mm can be seen as an ornate alternative.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	219	309	324	1105	26	£78.00
4	282	372	432	1473	34	£104.00
5	345	435	540	1841	43	£130.00
6	408	498	648	2210	51	£156.00
7	471	561	756	2578	60	£182.00
8	534	624	864	2946	68	£208.00
9	597	687	972	3315	76	£234.00
10	660	750	1080	3683	85	£260.00
11	723	813	1188	4051	93	£286.00
12	786	876	1296	4419	102	£312.00
13	849	939	1404	4788	110	£338.00
14	912	1002	1512	5156	118	£364.00
15	975	1065	1620	5524	127	£390.00
16	1038	1128	1728	5892	135	£416.00
17	1101	1191	1836	6261	144	£442.00
18	1164	1254	1944	6629	152	£468.00
19	1227	1317	2052	6997	160	£494.00
20	1290	1380	2160	7366	169	£520.00

Current Count 640mm cast iron radiators in Radiators2Go

10 sections (660mm) long in Pewter. £260.00, 2 available.

Buy a Radiator2Go today for earliest estimated delivery on Wednesday 29^th February.

Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.

View all models and sizes in Cast Iron Radiators2Go.

Buy bespoke Count 640mm cast iron radiators for earliest estimated delivery on Friday 2^nd March.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 16 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Count 640mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	108Watts / 368BTUs
Dimensions
Section height (including legs):	640mm
Section height (not including legs):	590mm
Section length (measured along the wall):	63mm
Radiator depth (perpendicular to the wall):	175mm
Distance from inlet/outlet pipe centre to floor:	100mm
Minimum distance from inlet/outlet pipe centre to skirting board:	88mm
Weight
Empty weight per section (middle section):	8.4kg
Empty weight per section (leg section):	8.8kg
Internal Volume
Internal volume per section:	1.8 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.