Baron 610mm

£26.00 per section exc. VAT

The Baron 610mm is modelled on the traditional school radiator and exemplifies the simplicity of the style. Sleek curves soften the design, bringing a homely feel to its smooth, minimalist finish. At just 125mm deep, this model is ideal in all spaces. Also available at 460mm tall.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	255	345	249	849	22	£78.00
4	330	420	332	1132	30	£104.00
5	405	495	415	1415	37	£130.00
6	480	570	498	1698	44	£156.00
7	555	645	581	1981	51	£182.00
8	630	720	664	2264	58	£208.00
9	705	795	747	2547	66	£234.00
10	780	870	830	2830	73	£260.00
11	855	945	913	3113	80	£286.00
12	930	1020	996	3396	87	£312.00
13	1005	1095	1079	3679	94	£338.00
14	1080	1170	1162	3962	102	£364.00
15	1155	1245	1245	4245	109	£390.00
16	1230	1320	1328	4528	116	£416.00
17	1305	1395	1411	4812	123	£442.00
18	1380	1470	1494	5095	130	£468.00
19	1455	1545	1577	5378	138	£494.00
20	1530	1620	1660	5661	145	£520.00

Buy bespoke Baron 610mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £17 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 20 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Baron 610mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	83Watts / 283BTUs
Dimensions
Section height (including legs):	610mm
Section height (not including legs):	555mm
Section length (measured along the wall):	75mm
Radiator depth (perpendicular to the wall):	125mm
Distance from inlet/outlet pipe centre to floor:	102mm
Minimum distance from inlet/outlet pipe centre to skirting board:	63mm
Weight
Empty weight per section (middle section):	7.2kg
Empty weight per section (leg section):	7.6kg
Internal Volume
Internal volume per section:	1.0 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.