Baron 460mm

£19.00 per section exc. VAT

The Baron 460mm is modelled on the traditional school radiator and exemplifies the simplicity of the style. Sleek curves soften the design, bringing a homely feel to its smooth, minimalist finish. Shorter than the Baron 610mm yet still only 125mm deep, this model is perfect for low windows and conservatories.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	258	348	186	634	16	£57.00
4	334	424	248	846	21	£76.00
5	410	500	310	1057	26	£95.00
6	486	576	372	1269	31	£114.00
7	562	652	434	1480	36	£133.00
8	638	728	496	1691	41	£152.00
9	714	804	558	1903	46	£171.00
10	790	880	620	2114	51	£190.00
11	866	956	682	2326	56	£209.00
12	942	1032	744	2537	61	£228.00
13	1018	1108	806	2748	66	£247.00
14	1094	1184	868	2960	71	£266.00
15	1170	1260	930	3171	76	£285.00
16	1246	1336	992	3383	81	£304.00
17	1322	1412	1054	3594	86	£323.00
18	1398	1488	1116	3806	91	£342.00
19	1474	1564	1178	4017	96	£361.00
20	1550	1640	1240	4228	101	£380.00

Buy bespoke Baron 460mm cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £17 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 20 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for Baron 460mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	62Watts / 211BTUs
Dimensions
Section height (including legs):	460mm
Section height (not including legs):	405mm
Section length (measured along the wall):	76mm
Radiator depth (perpendicular to the wall):	125mm
Distance from inlet/outlet pipe centre to floor:	102mm
Minimum distance from inlet/outlet pipe centre to skirting board:	63mm
Weight
Empty weight per section (middle section):	5kg
Empty weight per section (leg section):	5.4kg
Internal Volume
Internal volume per section:	0.9 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.