9 Column

£24.00 per section exc. VAT

This Victorian style 9 Column radiator is a low, compact model. It fits neatly under bay windows and is ideal for window seats. For a slimmer alternative see the 5 Column cast iron radiator.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	210	300	390	1330	22	£72.00
4	270	360	520	1773	29	£96.00
5	330	420	650	2217	36	£120.00
6	390	480	780	2660	43	£144.00
7	450	540	910	3103	50	£168.00
8	510	600	1040	3546	57	£192.00
9	570	660	1170	3990	64	£216.00
10	630	720	1300	4433	71	£240.00
11	690	780	1430	4876	78	£264.00
12	750	840	1560	5320	85	£288.00
13	810	900	1690	5763	92	£312.00
14	870	960	1820	6206	99	£336.00
15	930	1020	1950	6650	106	£360.00
16	990	1080	2080	7093	113	£384.00
17	1050	1140	2210	7536	120	£408.00
18	1110	1200	2340	7979	127	£432.00
19	1170	1260	2470	8423	134	£456.00
20	1230	1320	2600	8866	141	£480.00

Buy bespoke 9 Column cast iron radiators for earliest estimated delivery on 4th January 2012.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 20 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for 9 Column cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	130Watts / 443BTUs
Dimensions
Section height (including legs):	340mm
Section height (not including legs):	300mm
Section length (measured along the wall):	60mm
Radiator depth (perpendicular to the wall):	340mm
Distance from inlet/outlet pipe centre to floor:	76mm
Minimum distance from inlet/outlet pipe centre to skirting board:	170mm
Weight
Empty weight per section (middle section):	7kg
Empty weight per section (leg section):	7.4kg
Internal Volume
Internal volume per section:	1.2 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.