2 Column 750mm

£20.00 per section exc. VAT

The 2 column is quite a different style from the 3 and 4 column and would look odd in the same house. The 2 column is flat on the top and has a right angle on the corner, rather than the more rounded 3 and 4 column. The 2 column is more for a modern, funky look. If you have an Edwardian or Victorian house, the 3 and 4 column are more in keeping with the period.

No Sections	Radiator length, mm	Pipe centres, mm	Output, Watts	Output, BTUs	Weight, kg	Price exc. VAT
3	228	318	399	1361	14	£60.00
4	294	384	532	1814	19	£80.00
5	360	450	665	2268	24	£100.00
6	426	516	798	2721	28	£120.00
7	492	582	931	3175	33	£140.00
8	558	648	1064	3628	37	£160.00
9	624	714	1197	4082	42	£180.00
10	690	780	1330	4535	47	£200.00
11	756	846	1463	4989	51	£220.00
12	822	912	1596	5442	56	£240.00
13	888	978	1729	5896	60	£260.00
14	954	1044	1862	6349	65	£280.00
15	1020	1110	1995	6803	70	£300.00
16	1086	1176	2128	7256	74	£320.00
17	1152	1242	2261	7710	79	£340.00
18	1218	1308	2394	8164	83	£360.00
19	1284	1374	2527	8617	88	£380.00
20	1350	1440	2660	9071	93	£400.00

Current 2 Column 750mm cast iron radiators in Radiators2Go

5 sections (360mm) long in Pewter. £100.00, 1 available.
13 sections (888mm) long in Pewter. £260.00, 1 available.
14 sections (954mm) long in Pewter. £280.00, 1 available.
16 sections (1086mm) long in Pewter. £320.00, 1 available.

Buy a Radiator2Go today for earliest estimated delivery on Wednesday 8^th February.

Radiators2Go are ready-made cast iron radiators in popular sizes and finishes. They are identical in every way to their made-to-measure counterparts, but because we always keep them in stock we're able to get them to you quicker.

View all models and sizes in Cast Iron Radiators2Go.

Buy bespoke 2 Column 750mm cast iron radiators for earliest estimated delivery on Wednesday 22^nd February.

View our complete range of cast iron radiator models.

Prices are given for Pewter finish only. Add £3 per section for Satin Black. See Colours & Finishes for more finishes and prices. Add £30 per section for this cast iron radiator in the exquisite Full Polish finish.

Maximum lengths for delivery in one piece:
Ground floor destination - 20 sections.
Upstairs destination - 20 sections.
See why here

Delays sometimes occur. Please don't book your plumber until you have the radiators on site.

All figures are correct to the best of Castrads' knowledge. Variations in heat output and dimensions may occur. Castrads allows 45mm each end of the cast iron radiator for valves to give the pipe centre to pipe centre length, and the length of a radiator is calculated as the number of sections multiplied by section length plus 30mm. This allows for the length of the reducing bushes either end of the radiator. This figure is an approximation only and should not be used as a definitive measurement. See technical data for more information.

Tech specs for 2 Column 750mm cast iron radiators

Heat output
Heat output per section (ΔT=60°C):	133Watts / 454BTUs
Dimensions
Section height (including legs):	750mm
Section height (not including legs):	672mm
Section length (measured along the wall):	66mm
Radiator depth (perpendicular to the wall):	84mm
Distance from inlet/outlet pipe centre to floor:	110mm
Minimum distance from inlet/outlet pipe centre to skirting board:	42mm
Weight
Empty weight per section (middle section):	4.6kg
Empty weight per section (leg section):	4.9kg
Internal Volume
Internal volume per section:	0.9 L
Construction materials
Radiator sections:	Cast iron
Gaskets:	Steel reinforced silicon
End caps & reducing bushes:	Cast iron

Please note that all measurements are subject to a tolerance of up to 4%. All cast iron radiators are hand built to specification. Slight variations in radiator lengths do occur as a result.

Installing cast iron radiators

Castrads' cast iron radiators are fitted with standard ½" BSP reducing bushes, which makes them suitable for use with most modern valves and simple to incorporate into existing central heating systems.

View all radiator valves.

Radiators are supplied in the common bottom-bottom opposite ends (BBOE) configuration; the inlet and outlet are both at the bottom on either end of the cast iron radiator. All other configurations are possible, just let us know when placing your order.